Brief Introduction of Hand Crimp Tool Kit —— KIT1024

KIT1024 Products List: YJQ-W2A (AF8 M22520/1-01) Hand Crimping Tool + TH1A Turret Head (M22520/1-02) +TH163 Turret Crimper Positioner (M22520/1-04) +UH2-5 Adjustable Crimper Positioner (M22520/1-05) + G125 Go-no-go Gage (M22520/3-01) + 9/64 Hex Wrench + 8-32UNC×1 Screw + 8-32UNC×5/16 Screw

KIT1024

Product List of KIT1024

Datasheet/Specification of KIT1024

1. Precisetool YJQ-W2A Aviation Hand Crimping Tool for Military Connectors Aerospace Wiring Harness

· Qualified to M22520/1-01

· Equivalent to DMC AF8 Crimping Tool

· Has limitless application within the specified wire range of 12—16 AWG

· Gives a Mil-Standard 8 impression crimp, which assures maximum tensile strength

· Crimp depth can be adjusted by an 8 position selector knob conveniently located on the tool frame

· The precision ratchet controls cycling of the tool in both directions of handle movement which assures the same accurate crimp every time

· The carefully engineered design achieves the absolute maximum mechanical advantage and it is light-weighted to help minimize operator fatigue

· Suitable for military institutions, aviation companies and electronic connectors/military connectors/heavy duty connectors companies, wiring harness or cable assembly manufacturer

2. Precisetool TH163 (M22520/1-04) Adjustable Turret Head for AF8 Wire Crimper

· Weight: 0.25 lb

· Equivalent to M22520/1-04

· Adjustable turret crimper positioner

· Gives a standardized and accurate crimp every time

· Can be adjusted to match the diameter of the connectors and the wires desired

· A dataplate affixed to turret head lists specific contact part numbers, the corresponding position color code, and suggested selector depth settings for the wire size being used

3. Precisetool TH1A (M22520/1-02) Adjustable Turret Positioner For AF8 Aerospace Hand Crimping Tool Cable Crimper

· Weight: 0.25 lb

· Equivalent to M22520/1-02

· Adjustable turret crimper positioner

· Gives a standardized and accurate crimp every time

· A dataplate affixed to turret head lists specific contact part numbers, the corresponding position color code, and suggested selector depth settings for the wire size being used.

4. Precisetool UH2-5 (M22520/1-05) Postioner Head for Aviation Pneumatic/Hand Tools Wire Cable Crimping Tool

· Weight: 0.15 lb

· Equivalent to M22520/1-05

· Can be easily mated to the crimping tool frame

· Adjustable for a wide range of wire and connector sizes

· Adapt the tool frame to specific military or proprietary contact combination

· The screw can be secured with the locknut provided

· The selected contact is inserted through the entry hole on the opposite side of the tool frame from the head

· The height adjusting screw is rotated until the contact is in the proper position for crimping

· Can be used on commercial installations, home maintenance, laboratory work, and heavy duty military or aerospace applications

5. Precisetool G125 (M22520/3-1) Go-no-go Gauge for AFM8/AF8 Cable Crimping Tool

· GO: 0.039 inch

· NO-GO: 0.044 inch

· Equivalent to M22520/3-1

· Periodic gaging is recommended to insure accurate calibration

· Set the tool selector knob to position 4, and check indenter closure with the gage